Obsolete & Faulty Anilam DRO Digital-Readout-Display Replacement
One of our latest visits to a customer. A faulty & obsolete Anilam DRO – digital readout display. EEC worked on-site and replaced the faulty unit with a new Acu-Rite DRO 203 display, still using the original linear scales. Compatibility is key. ACU-RITE DRO 203 Digital Readout UK Versatile digital readout for up to three […]
Heidenhain DRO ND 760 Repair
HEIDENHAIN ND 760 Installed on Jones & Shipment 540 Surface Grinder We recently carried out repair and refurbishment work on an old Heidenhain DRO ND 760, a 20+ year-old Heidenhain digital readout system installed on a Jones & Shipmen 540 Surface Grinder (first manufactured in World War two, 1941). This original Heidenhain DRO equipment was […]
HEIDENHAIN & Seimens Replacement Cables – CNC/TNC Repairs
Sometimes CNC/TNC and DRO parts and components just wear out and need to be replaced. Cables are a common component for replacement as they are often subjected to movement during the operation of CNC machinery, which can cause wear and ultimately, failure over time. In this example, EEC replaced an X-axis Siemens Motor Power cable […]
Aerospace CNC Machining – Rapid Response Diagnoses & Repair Service
EEC Ltd supply rapid response TNC, CNC & DRO error/fault diagnoses & repair, to critical aerospace CNC machining operations throughout the south of England. Operating within highly regulated markets, aerospace CNC machining companies operate manufacturing services to ultra-high quality control & often to ‘just-in-time’ supply agreements with their customers. This dictates that, in the case […]
Hampshire CNC Repairs – Acu-Rite SENC 150 2.5 Meter Scale
EEC Ltd repair CNC, TNC and DRO machinery throughout Southern UK and install Acu-Rite CNC/TNC/DRO replacements and upgrades, to specification. In the event that a faulty product, component or part is obsolete or unavailable, EEC can replace the complete product with an Acu-Rite equivalent. In this case, EEC replaced a faulty Anilam scale with an […]
Annual DRO Calibration and FAGOR DRO Fault Diagnoses and Repair
DRO Maintenance and Calibration EEC Ltd were recently contacted by a longstanding customer in Hampshire, to preform their annual DRO check over and calibration. The DRO maintenance and calibration was successfully carried out on 7 manual Turret Mills. Fagor DRO Fault Diagnoses and Repair Whilst EEC were attending the site, issues were diagnoses on 2 […]
HEIDENHAIN Fault Finding & Error Diagnoses at EEC Ltd – Authorised UK HEIDENHAIN Distributors
EEC Ltd carry out fault finding and error diagnoses on DRO, TNC and CNC devices. We initiate a visit by arming ourselves with information about the device and wiring requirement. Here are a few examples of HEIDENHAIN faulting finding and error diagnoses.
Certified Approved Heidenhain Distributor
EEC are Heidenhain approved distributors, with 35 years experience in DRO/TNC/CNC fault finding, repairing and supplying new replacements with current and genuine calibrated Heidenhain test equipment. Specialising in incremental and absolute Heidenhain Linear scales and Rotary encoders. Please view some of our latest work.
Acu-Rite DRO 304 4 Axis DRO Installed onto New Vertical Lathe
EEC Ltd – 4 axis DRO installation in Hampshire EEC installed an Acu-Rite DRO 304 digital readout, into a new vertical lathe, in Hampshire. The lathe has now arrived at it’s final destination, in Indonesia. 4 Axis DRO – Acu-Rite DRO 304 Acu-Rite DRO 304 is a 4 axis DRO, with a 7 inch colour, […]